Dolphin by Hyrum Baker
Hyrum (14) and I have worked on Dolphin for the better part of a year. This lamp began as an unassuming piece of weathered drift wood, distinguished by its beaver chew marks at both ends.
Not owning an air compressor (yet), Hyrum devised an ingenious, low-cost method of cleaning the wood of sand and dust: a bicycle pump fitted with a ball needle. Quite effective.
Drilling this piece of wood, 48 inches from nose-tip to tail, was a challenge, due both to the length and the twisting curves of the wood. We bored several holes with a long 5/16″ bit, then enlarged the holes with a 3/8″ bit. Having the end of one bore meet the beginning of the next bore was indeed a challenge, but we made it work.
For convenience, we decided to stain the lamp wood laying flat before mounting it to its base.
With the lamp stained once, we were prepared to mount it to its base. I learned the hard way on another tall lamp that a single bolt leaves the lamp wobbly, no matter how tight. So we used two bolts, ratcheting the nuts down hard, with large washers on both ends, and with a little lock nut to keep them tight. Black caulk filled the holes and covered the bolt heads. We drilled and routed the base to accommodate the electrical chord.
The next challenge was to thread the lamp wire through the several angled drill holes. We first used a coat hangar to thread a length of electrician’s tape through the lamp, then used the tape to pull the wire through the lamp.
With all the hardware work complete, we now applied more coats of Provincial WiniWax stain, then three coats of gloss polyurethane. We often use different color stains for the base and the lamp in way that highlights the lamp (see Waves, Smoke, and Reach), but for Dolphin, a floor lamp, we thought using the same color stain for both was more effective.
(Dolphin, in the final stages, is pictured in the background, with Grace in the foreground, and Smoke looking on from the sidelines.)
With black felt on the bottom and a simple but pretty shade on top, Dolphin is ready to swim into someone’s home. We suggest a value of $850 for Dolphin (though we are confident that it would fetch more in many boutiques). As a reminder, Hyrum is making these exotic wood lamps to fund his way to the 2017 Boy Scout National Jamboree, and then to college.
Making these lamps together, while each one poses its own unique challenges, has been a true father-and-son joy. I hope to continue our hobby into the future and Hyrum and his brothers become fathers themselves.